Telephone：0752-3696596 / 3696552 / 2566848
Customer serviceQQ：2785123583
Mailbox：hzdsksy@163.com
Address：Gate 2, New Material Industrial Park, Yonghu Town, Huiyang District, Huizhou City, Guangdong Province
![UV offset printing ink [DSK281RS Series]](http://cdn.myxypt.com/21cf5895/23/06/30e18405c705eef4f0e5b31da75be11e79901655.jpg)
DSK281RS seriesUV offset printing inkspecification
Product name: UV offset printing ink
Model: DSK281RS series
Packing: 1KG/ can
I. Introduction of product features:
DSK281RS series ink is a UV offset printing ink, this product is mainly used in paper absorbent substrate, with a wide printing water range and on-machine safety; After printing, after UV lamp irradiation, instant curing can be immediately processed, no back printing or sticky problems; Good adhesion with most absorbent substrates; High color intensity, high fullness, good ink transfer, provide good dot definition; VOC meets the requirements of national cigarette pack control and can be directly used in high-end products such as tobacco and alcohol packaging. In addition, this product gives the print more flexibility, higher transparency, more suitable for printing on laser gold and silver cardstock.
Second, technical parameters:
item | Parameter standard | item | Parameter standard |
Appearance: (visual) | Four colors and various spot color paste | Solid content: (weight loss method) | 100% |
Viscosity: (cps/25℃) | 90,000 to 150,000 | Adhesion: (hundred-cell method) | 100/100 |
Anti-flying ink | optimal | Fineness (μm) | 5 or less |
VOCs (benzene content) | 0.003 PPM or less | Flexibility: | Fold in half without bursting |
Fluidity (flowmeter) | 30-32mm | Viscosity: (viscometer) | 15 |
Emulsion value: (Emulsifier) | 30 | Tinting power | 100/100 |
Transparency: | optimal | Yellowing grade: (UV) | Level 4.5 or above |
Shelf life: (25℃) | A year |
Third, the use of technology:
1, printing method: offset printing (ink bucket type) : printing speed 8000-13000 RPM.
2, drying method: UV light curing, it is recommended that 18KW×3 UV lamps, curing energy above 90mj.
Iv. Precautions:
1, DSK281RS series ink can be used directly, can not add ordinary ink additives.
2, reduce the viscosity can add 1-3% DSK281RS ink oil for dilution.
3, reduce the color concentration can be appropriate to add the corresponding diluent, stir evenly, to achieve the desired effect.
4, reduce viscosity and drawing conditions can add less than 5% of our special anti-stick agent to reduce viscosity.
5, increase the hiding power or dilute the color brightness can be adjusted with white ink.
6, for increasing scratch resistance requirements, 0.5-1% of our special scratch resistance agent can be added to improve the adhesion and scratch resistance of the ink.
7, standard curing conditions: 18KW*3 lamp, lamp distance 10-15cm (depending on the reflector), the total light intensity ≥90mj/cm2.
8, the use of UV ink printing press must use special UV ink or ordinary dual-purpose rubber blanket and ink roller.
9, the use of PS printing plate must be baked at 200 degrees for more than 15-45 minutes.
10, ordinary cleaning agent can not be used to clean UV printing machine, must use special ink special cleaning agent.
11, black absorbs more ultraviolet light, generally placed in the first color printing, it is recommended that the color sequence is good from deep to light.
12, ink storage environment temperature to 15-25℃ is appropriate, storage period is 12 months.
13, UV ink use as far as possible not to contact with the skin, if the stick should immediately wash with soapy water.
