Telephone：0752-3696596 / 3696552 / 2566848
Customer serviceQQ：2785123583
Mailbox：hzdsksy@163.com
Address：Gate 2, New Material Industrial Park, Yonghu Town, Huiyang District, Huizhou City, Guangdong Province
3D light variable ink instructions
Product name: UV screen printing 3D light change ink
Type number: DSK9510
Packing: 1KG/ can
I. Introduction of product features:
3D optical color-changing ink is currently the most complex anti-counterfeiting ink, the ink has an optical color-changing effect (that is, the printing color block presents a pair of colors, such as: red-green, green-blue, orange-green, red-yellow, green-purple, green - purple and so on. Looking or side looking under white light, with the change of human eye Angle, showing two different colors, light change characteristics are strong, the characteristics are obvious, do not need any instruments and equipment can be identified); It also has a magnetic forming effect (that is, the ink is formed according to the shape of the magnetic mold under the magnetic attraction of a specific magnetic mold). Printing features with any other ink and printing methods can not be copied, anti-counterfeiting reliability is very strong.
Second, technical parameters:
item | Parameter standard | item | Parameter standard |
Appearance: | Viscous liquid | Viscosity: (cps/25℃) | 2000±200 |
Adhesion: (3M tape) | 100/100 | Solid content: (weight loss method) | 99±1 |
Light changes color: | Shelf life: | 12 months at room temperature |
Third, the use of technology:
1. Printing method: Screen printing: recommended 250-300 mesh screen printing; If the viscosity is high in the printing process, we can dilute it with our special diluent.
2, drying method: UV light curing, recommended 5.6KW×3 curing time of about 1.5-2 seconds. Or the curing energy is more than 100MJ.
3, laminating requirements: laminating temperature 130-150℃, hot laminating time 20-25 minutes, air cooling time 15-20 minutes laminating pressure does not exceed 11Mpa.
4, the way of use: first screen printing, and then put the screen printing on the magnetic mold for about 3-5 seconds, after forming the UV machine dry.
Iv. Precautions:
1, the printing effect is related to the substrate used, the working environment, laminating pressure/time/temperature/dryness and other factors. If the effect is different before and after using the same type of ink, please confirm that the above printing conditions are stable.
2, accidentally contact the product to the skin or splash into the eyes, please wash immediately with plenty of water, in serious cases, please seek medical attention in time;
3. This product will appear layered phenomenon when placed, so please be sure to stir well before use. This product is a volatile product, so please seal it immediately after use.
4. Store in a cool and ventilated place, away from fire.
