Instructions for DSK3800S
Product name: UV offset dumb oil
Model: DSK3800S
Packing: 1KG/ can or 5KG/ barrel
1. Product Introduction:
DSK3800S matte oil is UV offset printing matte oil, mainly used in plastic substrate surface ink glazing protection, especially for SM card, credit card and other social card surface glazing, can also be used for local glazing, improve the aesthetic effect of the card surface. This product has the characteristics of scratch resistance, wear resistance, high temperature resistance, no yellowing, strong adhesion and so on. Products comply with ROSH and various environmental standards.
Two: Technical parameters:
item | Parameter standard | item | Parameter standard |
Appearance: (visual) | Milky white to mist thick body | Solid content: (weight loss method) | 100% |
Viscosity: (cps/40℃) | 4000±200 | Adhesion: (hundred-cell method) | 100/100 |
Wear resistance: (4 lb) | More than 1000 times | Yellowing grade: (UV) | Level 4.5 or above |
Shelf life: (25℃) | A year |
Three: Use process:
1, printing method: offset printing (ink bucket type) : printing speed of 6000-10000 cards/hour.
2, drying method: UV light curing, it is recommended that 8KW×3 UV lamps, curing energy in 90-110mj, curing time 1.5-2 seconds,
3, laminating requirements: laminating temperature 130-150℃, hot laminating time 18-23 minutes, cold pressing time 15-20 minutes, laminating pressure does not exceed 11Mpa.
Four: Precautions:
1. The printing effect of gloss oil is related to the printing substrate used, working environment, time and temperature, etc. Please ensure that the printed product is fully dry after UV lamp; Ensure the stability of the above printing conditions. Otherwise, it will affect the surface quality requirements of the card body.
2, accidentally contact the product on the skin or splash into the eyes, please wash immediately with water, in serious cases, please seek medical attention in time.
3, after opening the light oil should be used as soon as possible or sealed in time, pay attention to avoid light.
4. The data listed in this product is based on the results obtained by our current laboratory and some customers. Due to the influence of customers' use conditions and methods, the results may vary, so the content listed in this product is for reference only without any guarantee. Customers should pre-test its applicability and effectiveness before using this product.